6
The Monitor Memory Areas Dialog
Box is displayed. Check that D is
selected. Click Monitor.
7
Enter 10000 in the Start Address
Field of the D Window.
Check that the start address
changes to D10000.
8
Select the bit 0 value of D10000
(digital output 0) and click On.
The bit 0 value of D10000 (digital
output 0) changes to 1.
9
Enter 10100 in the Start Address
Field.
Check that the start address
changes to D10100.
Check that the bit 0 value of D10101
(digital input 0) shows 1.
7.EtherNet/IP Connection Procedure
46