Omron CJ Series Connection Manual page 50

10
Check that the LED status of Digital
Input Unit and Digital Output Unit is
as shown below.
Digital input 0: Lit
Digital output 0: Lit
11
Enter 10000 in the Start Address
Field of the D Window.
Check that the start address
changes to D10000.
12
Select the bit 0 value of D10000
(digital output 0) and click Off.
The bit 0 value of D10000 (digital
output 0) changes to 0.
13
Enter 10100 in the Start Address
Field.
Check that the start address
changes to D10100.
Check that the bit 0 value of D10101
(digital input 0) shows 0.
14
Check that the LED status of Digital
Input Unit and Digital Output Unit is
as shown below.
Digital input 0: Not lit
Digital output 0: Not lit
7．EtherNet/IP Connection Procedure
Digital Input Unit Digital Output Unit
Digital Input Unit Digital Output Unit
47