Omron CJ Series Connection Manual page 27

Ethernet/ip coupler unit

Hide thumbs Also See for CJ Series:

Table of Contents

The dialog box on the right is

displayed. Check the contents

and click No.

The dialog box on the right is

displayed. CX-Programmer and

PLC are automatically

connected.

Check that CX-Programmer and

PLC are normally connected

online.

*The

icon is pressed

down during online connection.

Additional Information

If PLC cannot be connected online, check the cable connection.

Or, return to step 1, check the settings and repeat each step.

For details, refer to Connecting Directly to a CJ2 CPU Unit Using a USB Cable of the

CX-Programmer OPERATION MANUAL (Cat. No. W446).

Additional Information

The dialog boxes explained in the subsequent procedure may not be displayed depending on

the environmental settings of CX-Programmer.

For details on the environmental settings, refer to Options and Preferences in CHAPTER 3

Project Reference in PART 1: CX-Programmer of the CX-Programmer OPERATION

MANUAL (Cat. No. W446).

This document explains the setting procedures when ''Confirm all operations affecting the

PLC'' is selected.

7．EtherNet/IP Connection Procedure

Table of Contents

Nx series