5
Check that EtherNet/IP Coupler
is selected in the Device Field.
Click Create.
6
The New Project is displayed.
The following panes are
displayed in this window.
Left: Multiview Explorer
Top right: Toolbox
Middle top: Edit Configuration Pane
The following tabs are displayed
in the bottom middle of this
window.
Output Tab Page
Build Tab Page
7
Double-click NX-EIC202 under
Configurations and Setup -
EtherNet/IP in the Multiview
Explorer.
7.EtherNet/IP Connection Procedure
Edit
Configuration
Pane
Multiview
Explorer
Output Tab
Build Tab
Page
Page
Toolbox
16