Omron CJ Series Connection Manual page 42

7.4.4. Setting the Connections
Associate the tags of the target device (that receives the open request) with the tags of the
originator device (that requests for opening).
1
Select 192.168.250.2 in the
Unregister Device List Field.
Click the Down Arrow Button
that is shown in the dialog box.
2
192.168.250.2 is registered in
the Register Device List Field.
Select 192.168.250.2 and click
New.
3
The Edit Connection Dialog Box
is displayed. Select Input /
Output from the pull-down list of
Connection I/O Type.
Set the values listed in the
following table in the Originator
Device and the Target Device
Fields.
■Connection configuration settings
Connection configuration
Connection I/O Type
Originator Device
Target Device
7．EtherNet/IP Connection Procedure
Input Tag Set
Connection type
Output Tag Set
Connection type
Output Tag Set
Input Tag Set
Set value
Input / Output
D10100-[8 Byte]
Multi-cast connection
D10000-[2 Byte]
Point to Point connection
Input_100-[8 Byte]
Output_148- [2 Byte]
39