Omron CJ Series Connection Manual page 36

7.4.2. Uploading the Network Configuration
Upload the network configuration.
1
Select Upload from the Network
Menu to upload the device
information on the network.
2
The dialog box on the right is
displayed. Confirm that there is
no problem, and click Yes.
3
The Target Device Dialog Box is
displayed. Select 192.168.250.1
and 192.168.250.2.
Click OK.
*If 192.168.250.1 and
192.168.250.2 are not
displayed in the dialog box,
click Add to add the
addresses.
*A displayed address depends
on the status of Network
Configurator.
4
The device parameters are
uploaded. When the uploading
is completed, the dialog box on
the right is displayed.
Check the contents and click
OK.
7．EtherNet/IP Connection Procedure
33