5
Connect a LAN cable to the
EtherNet/IP port on PLC, and
connect a USB cable to the USB
port. As shown in 5.2. Device
Configuration, connect Personal
computer and Switching Hub to
PLC.
6
Turn ON PLC and Switching
hub.
7
The set IP address is displayed
on the seven-segment LED
indicators. Afterwards, the last
digit of the IP address is
displayed in hexadecimal during
normal operation.
7.EtherNet/IP Connection Procedure
Personal
computer
USB cable
Power Supply Unit
PLC
Switching hub
LAN cable
CPU Unit
24 VDC power supply
22