Mounting; Wall Mounting; Tabletop Placement; Rack Mounting - Extron electronics RGB-DVI 300 User Manual

Mounting

This section outlines the various mounting options available for the RGB-DVI 300,
RGB-HDMI 300, and RGB-HDMI 300 A:
•
•
•
•
•

Wall Mounting

The RGB-DVI 300, RGB-HDMI 300, and RGB-HDMI 300 A can be mounted on the wall, using
an optional mounting kit. This enables the unit to be concealed behind wall-mounted flat screen
monitors (see
kit.

Tabletop Placement

Attach the four provided rubber feet to the bottom of the unit and place it in any appropriate
location.

Rack Mounting

UL Guidelines for Rack Mounting

The following Underwriters Laboratories (UL) guidelines are relevant to the safe installation of
these products in a rack:
•
•
•
•
•

Rack Mounting Procedure

The unit can be mounted on any of the optional Extron rack systems (see
suitable models).
To mount the scaler on a rack shelf, follow the instructions provided with the shelf accessories.
Wall Mounting
Tabletop Placement
Rack Mounting
Under-desk Mounting
Through-desk Mounting
www.extron.com
Elevated operating ambient temperature — If the unit is installed in a closed or multi-
unit rack assembly, the operating ambient temperature of the rack environment may be
greater than room ambient temperature. Therefore, install the equipment in an environment
compatible with the maximum ambient temperature (Tma: +122 °F, +50 °C) specified by
Extron.
Reduced air flow — Install the equipment in the rack so that the equipment gets adequate
air flow for safe operation.
Mechanical loading — Mount the equipment in the rack so that uneven mechanical
loading does not create a hazardous condition.
Circuit overloading — Connect the equipment to the supply circuit and consider the effect
that circuit overloading might have on overcurrent protection and supply wiring. Appropriate
consideration of the equipment nameplate ratings should be used when addressing this
concern.
Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted equipment.
Pay particular attention to supply connections other than direct connections to the branch
circuit (such as the use of power strips).
for suitable options). Follow the instructions provided with the
RGB DVI 300 and RGB HDMI 300 (A) • Mounting
www.extron.com for
41