Running The Sppcp - Extron electronics RGB-DVI 300 User Manual

Running the SPPCP

The computer can be connected to the video scaler using a cable from the female 9-pin
D connector on the PC to either the RS-232 captive screw connectors on the rear panel or the
Config port on the front panel of the video scaler.
To start the program, click the desktop icon (shown at right) or click the Windows
button and select
Start
Processing
The Select Connection Type dialog box opens:
Figure 28.
Select the
RS-232
rate to use (the default rate is
Click
Connect
Figure 29.
For complete instructions on controlling the RGB-DVI 300, RGB-HDMI 300, or RGB-HDMI 300 A
using this software, see the Signal Processing Products Control Program Help File, which can be
opened by clicking
Figure 30.
>
All Programs
>
Signal Processing Products Control Program
Select Connection Type Dialog Box
tab and then select the computer port (typically
9600 ).
. The program opens to the main screen. By default the
SPPCP Main Screen
in the
Contents Help
Accessing the Help File
RGB DVI 300 and RGB HDMI 300 (A) • Software and Firmware
>
Extron Electronics Signal
.
COM1
Control
menu (see figure 27) or by pressing the <
or ) and the baud
COM3
tab is selected:
> key.
F1
26