Front Panel Indicators And Controls - Extron electronics RGB-DVI 300 User Manual

Front Panel Indicators and Controls

Figure 11.
The front panels of the RGB-DVI 300, RGB-HDMI 300, and RGB-HDMI 300 A have a bicolor
(green and amber) LED indicator, a Config port, Menu and Enter buttons, and two rotary
encoders.
1
2
3
4
CONFIG
1 1 2 2
CONFIG
RGB-DVI 300 and RGB-HDMI 300 A
LED indicator — A steady green light indicates the unit is receiving power and has an
active video input. A steady amber light indicates the unit is receiving power but no video
input.
Config port — This connects to a host device (see Front panel Cabling on page 5).
Menu and Enter buttons — These buttons are used to navigate the menu when you are
configuring the input and output video signals (see Front Panel Menu Controls on page 14)
and to enable and disable the front panel security lockout (also called executive mode). For
more information, see Front Panel Security Lockout on page 14).
NOTE: To see menu selections, attach a display device to the output of the video
converter.
Rotary encoders — The horizontal and vertical rotary encoders highlight menu items and
adjust the value of items that have been selected from the menu.
MENU ENTER
3 3
MENU ENTER
RGB DVI 300 and RGB HDMI 300 (A) • Configuration
ADJUST
RGB - HDMI 300 A
4 4
ADJUST
RGB - DVI 300
12