Table of Contents
Advertisement
Commit the Configuration
(Optional) Display the configuration to verify that it is correct.
1.
[edit]
root@host# show
system {
host-name host-name;
domain-name domain-name;
backup-router address;
root-authentication {
authentication-method (password | public-key);
}
name-server {
address;
}
}
interfaces {
fxp0 {
unit 0 {
family inet {
address address/prefix-length;
}
}
}
}
Commit the configuration to activate it on the router.
2.
[edit]
root@host# commit
(Optional) Configure additional properties by adding the necessary configuration statements. Then commit the changes to
3.
activate them on the router.
[edit]
root@host# commit
When you have finished configuring the router, exit configuration mode.
4.
[edit]
root@host# exit
root@host>
Safety Warnings
WARNING:
See installation instructions before connecting the router. This is a summary of safety warnings. For a
complete list of warnings for this router, including translations, see the ACX5448 Universal Metro Router Hardware
Guide at
https://www.juniper.net/documentation/
WARNING:
The intrabuilding port(s) of the router is suitable for connection to intrabuilding or unexposed wiring or
cabling only. The intrabuilding port(s) of the router MUST NOT be metallically connected to interfaces that connect
to the OSP or its wiring. These interfaces are designed for use as intrabuilding interfaces only (Type 2 or Type 4 ports
as described in GR-1089-CORE, Issue 4) and require isolation from the exposed OSP cabling. The addition of primary
protectors is not sufficient protection to connect these interfaces metallically to OSP wiring.
Copyright © 2018, Juniper Networks, Inc.
ACX5448 Universal Metro Router Quick Start Guide
.
17
Advertisement
Table of Contents
