Extending A System Of Standards In The Pipe Part Catalog; Extending A Standard In A System Of Standards; Creating Geometry Standards - Siemens COMOS Operating Manual

3. To add new tabs, proceed as usual.
You will find more information on this topic in the "COMOS Platform Administration" manual,
keyword "Creating tabs and attributes".
4. If you have created a new tab, use it in the template folder at the corresponding objects
under the following node:
"@10 > A20 > A20 > A20 > A10 Geometry tables"
Refer to the "Catalog tab" field on the tab that you have recently created.
The new tab is automatically applied to the "standard geometry tables" in the "@30" node.
See also
Overview: Creating a new system of standards (Page 55)
3.7.1.5

Extending a system of standards in the pipe part catalog

Procedure
1. Navigate to a node in the pipe part catalog which contains pipe parts that are dependent
on the system of standards:
Example: "@50 > A10 > A10 > A10 > 1 DIN/EN metric"
2. Select the "Copy structure" command from the context menu.
The structure is created parallel to the selected object. It contains the suffix "_1".
3. Enter the name of the new system of standards in the description.
4. Select a new system of standards at the pipe part on the "Attributes > Part description" tab
in the "Y00A00038 SSys" attribute.
5. In order to apply the value to all "Y00A00038 SSys" attributes of the object, click on the
"Update attributes" button.
Hint: Change the bulk processing in order to change the system of standards at all objects.
You can find more information on this topic in the "COMOS Platform Administration"
manual, keyword "Bulk processing".
The standard tables at the attributes of the pipe part objects are switched by the shift in the
system of standards.
6. Optional: Change the remaining properties of the copied pipe part objects.
See also chapters Using the "CatStd(...)" function (Page 32) and Administering pipe part
catalogs (Page 27).
3.7.2

Extending a standard in a system of standards

3.7.2.1

Creating geometry standards

If a geometry standard is missing from a system of standards, you can create one.
Example: You would like to create a new standard collection under the following node:
PipeSpec Designer
Operating Manual, 09/2014, A5E32076948-AA
Preparing for creation and maintenance of pipe specs
3.7 Administering standards
59