Administering Pipe Part Catalogs; Structure Of The Pipe Part Catalogs - Siemens COMOS Operating Manual

Table
● Display properties:
"Row display": "Extend dynamically", as otherwise you cannot update the table
subsequently in order to add new rows.
● Columns:
3.5

Administering pipe part catalogs

Overview
The database is supplied with the pipe part catalog. The catalogs are located in the node:
"@50 > A10 > A10 > A10 Pipe part catalog"
The catalogs are nominal-diameter-independent. The nominal-diameter-dependent values are
parameterized so that one base object bundles the characteristics for all nominal diameters.
The nominal-diameter-dependent values are entered in the engineering data as soon as a
user actually assigns a nominal diameter to a component.
Use of pipe part catalogs
● 3D Integration
● Isometrics
● P&ID
3.5.1

Structure of the pipe part catalogs

The pipe part catalogs are managed separately according to the system of standards. The
database is already populated with catalogs based on the DIN/EN and ANSI/ASME systems
of standards.
The pipe part catalogs have the following basic structure:
● System of standards > Pipe part type > Connection type > Material > Pipe parts
● The flange node has the following structure: Connection type > Pressure stage > Material
PipeSpec Designer
Operating Manual, 09/2014, A5E32076948-AA
Description
"M <mm>"
"UEB <mm>"
"P <mm>"
WT <kg>
Preparing for creation and maintenance of pipe specs
Purpose
Nut height
Overlap
Pitch
Weight
3.5 Administering pipe part catalogs
Configuration
You can enter local dimensions in the ta‐
ble in the pipe part catalog.
27