"Error analysis for 3D objects" plugin
12.3 Interface of the plugin
12.3
Interface of the plugin
Structure
The "Error analysis for 3D objects" plugin has two tabs:
● "Detail evaluation" tab:
Analyze the attributes of a pipe part required for geometry calculation in relation to a single
nominal diameter.
● "Bulk analysis" tab:
Check whether the geometry can be calculated correctly for multiple pipe parts and for all
available nominal diameters.
Structure of the "Detail evaluation" tab
The "Detail evaluation" tab has the following structure:
134
PipeSpec Designer
Operating Manual, 09/2014, A5E32076948-AA