Daikin ALTHERMA HT Service Manual page 121

ESIE09-08B
Press BS1 (MODE button) for more than 5 sec.
to activate setting mode 2
Setting mode 2
Press xx times BS2 button to select setting
Press 1 time BS3 button to enter setting
Press 1 time BS2 button to change setting
Press 1 time BS3 button to confirm setting
Press 1 time BS3 button to activate setting
Test Operation
Setting mode 1
(Initial condition)
Press BS1 to leave mode
(MODE button).
(Set): Select mode with BS2 (SET button) in each selection step.
Press BS1(MODE button).
Field Setting
Monitor mode
Check item selection (Set)
Press BS3
(RETURN button).
Contents display
Press BS3
(RETURN button).
Press BS1
(MODE button).
(V2762)
109