Set Up - Mira Mode Maxim Installation And User Manual

Set Up: Controller
Maximum Temperature Setting with the Controller
1
Hold down the Deluge showerhead Button
(top half) for 10 Seconds approx. until the
Temperature Indicator light pulses on/off.
Note: After 5 seconds the lights will pulse to
indicate pairing mode, you need to continue
to hold the button for the entire 10 seconds.
2
Adjust the temperature indicator in accordance
to the table below to set the desired maximum
temperature.
Temp. Indicator Position Temp
C Exit No Change
1-3 41°C
4-6 45°C
7-9 48°C
H Exit No Change
Caution! Make sure that the maximum outlet
temperature is suitable and safe for all users.
3
Press the Deluge showerhead Button to set
the maximum temperature. The temperature
indicator light will flash twice to confirm the
setting has been completed.
40
Temperature
Indicator
Set Up: Mobile Phone
You can set up your shower using your iPhone or Android Phone with the Mira App.
1
Download the Mira App via the appropriate application store onto your compatible device:
Note: Not all Apple or Android devices are compatible, please ensure you are
using up to date Apple or Android Software / Operating System.
Mira endeavour to ensure that the Mira Showering App is compatible with the
latest versions of Apple and Android Operating Systems. If your device is not
capable of running the latest versions of Operating Systems the Mira App may
NOT be compatible with your device.
Your shower can be set up either by using the Controller or via the Mira APP.
See "Setting up your Shower".
2
Once the Mira App has been installed,
open the application on your device
and follow the on-screen instructions
to connect to your phone to your
Digital Mixing Valve.
41