Table of Contents
Advertisement
2
Mark the positions for the fixing holes
for the RAC back plate.
4
34
3
Drill the fixing holes, fit the wall plugs
and secure the backplate to the wall
with two fixing screws.
8.0 mm
5
6
Temporarily hold the top support in
position. Make sure that it is level and
mark through the position of the fixing
hole in the top support
Optional hole position
(Only one required)
621 mm to top
hole position
8
Fit the cover over the elbow and tighten
the screw anti-clockwise.
7
Drill the fixing hole for the top support and
fit the wall plug
7.0 mm
9
Fit all the components onto the slide
bar and fit the slide bar assembly in
position, making sure that it locates
correctly.
35
Hide quick links:
Advertisement
Table of Contents
