Select A Machine To Use - Roland DWX-30 User Manual

Select a machine to use

Up to four machines can be connected to a single computer but parallel use is unavailable. So select a ma-
chine to use.
Procedure

Go to [Start Menu], and click [All Programs] (or [Program]) - [Roland VPanel for DWX-
30] - [VPanel].
The [Printer Select] window appears

To change a machine to use
Quit VPanel. Then repeat the steps
To change the name of the machine which has been set, change the name of the installed
printer (the machine you are using).
Windows 7: From [Start] menu, click [Control Panel]  [Hardware and Sound]  [Devices and
Printers].
Windows Vista: From [Start] menu, click [Control Panel]  [Hardware and Sound]  [Printers].
Windows XP: From [Start] menu, click [Control Panel]  [Printers and Other Hardware]  [Print-
ers and Faxes].
Select the name of driver of the machine (Printer) you are using, and change the name.
Restart VPanel.
The name which has been changed appears on the top window.
If the machine name is not changed, "DWX-30
(Copy 1)" is displayed. (The third machine is dis-
played as "DWX-30 (Copy 2).")
The VPanel program starts.
 
and to select a machine to change.
2-5 Connecting Multiple Units

Select a machine to use.

Click [OK].
Chapter 2 Installation and Setup Chapter 2 Installation and Setup
47