Connecting To The Computer - Roland DWX-30 User Manual

2-3 Cable Connections
Right side

Connecting to the Computer

You use a USB cable to connect the machine and the computer. At this time, however, the connection to the
computer must not be made yet. You make the connection to the computer when you install the Windows-
based driver.
 P. 41, "Installing the Windows-based Driver"
 Be sure to make the connection according to the instructions on page 41, "Installing the Windows-based
Driver." Making the connection without doing so may cause driver installation to fail and make use impos-
sible.
 For the USB cable, use the included cable.
 Never use a USB hub.
Left side
Computer
40
Chapter 2 Installation and Setup
USB cable
At this time, keep the cable
unconnected
Electrical outlet
Power cable