Unpacking - Roland DWX-30 User Manual

2-2 Installation

Unpacking

Retaining materials are attached to protect the machine from vibration during shipment. When installation is
complete, remove these and store in the specified locations.
 Remove all retaining materials. Any that remain may cause faulty operation or breakdown when the power
is switched on.
 The retaining materials are required when moving the machine to a different location. Store them carefully
so that they do not get misplaced.
WARNING
Removing the retainers
Retainer C
Remove.
Retainer A
Cap screws
This is also used to store the retainers.
36
Chapter 2 Installation and Setup
Carry out these operations before you connect the power cord.
Inadvertent powerup may result in pinched hands or other injury.
Fixing tape
Retainer B
Remove the fixing tape on
the back of the machine.
Make sure the power cord is
unplugged, and remove the
retainer A, B, and C, and the
fixing tape.