Table of Contents
Advertisement
6. Go to the [Action] menu, and click [Uninstall].
7. In "Confirm Device Uninstall" window, select [Delete
the driver software for this device.], and then click [OK].
8. Detach the USB cable connected to the printer, and
the restart Windows.
9. Uninstall the driver. Carry out the steps from step 3
in page 89 "Uninstall the Driver Windows 7" to uninstall
the driver.
10. Install the driver again according to the procedure in
page 41 "Installing and Setting Up the Software. "
Windows Vista
1. If the [Found New Hardware] appears, click [Cancel]
to close it.
2. Click the [Start] menu, then right-click [Computer].
Click [Properties].
3. Click [Device Manager]. The [User Account Control] ap-
pears, click [Continue]. The [Device Manager] appears.
4. At the [View] menu, click [Show hidden devices].
5. In the list, find [Printers] or [Other device], then double-
click it. When the model name you are using or [Unknown
device] appears below the item you selected, click it to
choose it.
6. Go to the [Action] menu, and click [Uninstall].
7. In "Confirm Device Uninstall" window, select [Delete
the driver software for this device.], then click [OK].
8. Detach the USB cable connected to the printer, and
the restart Windows.
9. Uninstall the driver. Carry out the steps from step 3 in
page 89"Uninstall the Driver Windows Vista" to uninstall
the driver.
10. Install the driver again according to the procedure in
page 41 "Installing and Setting Up the Software. "
Windows XP
1. If the [Found New Hardware Wizard] appears, click
[Finish] to close it.
2. Click the [Start] menu, then right-click [My Computer].
Click [Properties].
3. Click the [Hardware] tab, then click [Device Manager].
The [Device Manager] appears.
4. At the [View] menu, click [Show hidden devices].
5. In the list, find [Printers] or [Other device], then double-
click it. When the model name you are using or [Unknown
device] appears below the item you selected, click it to
choose it.
6. Go to the [Action] menu, and click [Uninstall].
7. In "Confirm Device Uninstall" window, crick [OK].
8. Close the [Device Manager] and click [OK].
9. Detach the USB cable connected to the printer, and
the restart Windows.
10. Uninstall the driver. Carry out the steps from step 3
in page 90 "Uninstall the Driver Windows XP" to uninstall
the driver.
11. Install the driver again according to the procedure in
page 41 "Installing and Setting Up the Software. "
Uninstalling the Driver
When uninstalling the driver, perform following opera-
tion.
Windows 7
*If the driver is uninstalled without following the proce-
dure given below, there is a possibility that it might not
be able to be re-installed.
1. Before you start uninstallation of the driver, unplug
the USB cables from your computer.
2. Log on to Windows as "Administrator" right.
3. From the [Start] menu, click [Control Panel]. Click
[Uninstall a program].
4. Click the driver for the machine to delete to select it,
then Click [Uninstall].
5. A message prompting you to confirm deletion ap-
pears. Click [Yes].
6. From the [Start] menu, choose [All Programs], then
[Accessories], then [Run], and then click [Browse].
7. Choose the name of the drive or folder where the
driver is located. (*)
8. Select "SETUP.EXE" and click [Open], then click [OK].
9. The [User Account Control] appears, click [Allow].
10. The Setup program for the driver starts.
11. Click [Uninstall] to choose it. Select the machine to
delete, then click [Start].
12. If it is necessary to restart your computer, a window
prompting you to restart it appears. Click [Yes].
13.The uninstallation finishes after the computer re-
starts.
(*) When using the CD-ROM, specify the folder as shown
below (assuming your CD-ROM drive is the D drive).
D:\Drivers\25D\WIN7X64 (64 bit edition)
D:\Drivers\25D\WIN7X86 (32 bit edition)
If you're not using the CD-ROM, go to the Roland DG
Corp. website (http://www.rolanddg.com/) and down-
load the driver for the machine you want to delete,
then specify the folder where you want to expand the
downloaded file.
Windows Vista
1. Before you start uninstallation of the driver, unplug
the USB cables from your computer.
2. Log on to Windows as "Administrators" right.
Chapter 5 Appendix
5-2 What to Do if...
89
Advertisement
Table of Contents
