About This Machine; What You Can Do With This Machine; Documentation Included With The Machine - Roland DWX-4W Setup Manual

About This Machine

What You Can Do with This Machine

This machine is a dental cutting and milling machine that uses glass ceramics, composite resin to make dental
prostheses, including crowns, bridges, inlays, onlays, and veneers.
Installing and setting up the exclusive software on your computer and connecting your computer to this
machine enables you to create high-quality dental prostheses.
For the latest information regarding this machine (including manuals), see our special Easy Shape website
(http://www.rolandeasyshape.com).

Documentation Included with the Machine

The following documentation is included with the machine.
DWX-4W Setup Guide (this manual)
This manual describes how to install the machine and provides information on such matters as how to install
and set up the included software. Be sure to read this first.
DWX-4W User's Manual (electronic-format manual)
This manual explains how to operate the software and how to perform milling using this machine. The manual
is in electronic format, and no printed document is included. You can find the manual on the included Roland
Software Package CD.
P. 40 "Installing the Software"

Daily Maintenance Card ("Before Daily Operations")
This document provides an overview of the procedures that must be performed before daily operations. Be
sure to perform the operations on this card before starting machine operations each day.
22
1. Getting Started