Double Din Head Unit Provision - Metra Electronics 99-7860 Installation Instructions Manual

DOUBLE DIN HEAD UNIT PROVISION

*
Note: Refer also to the instructions included with the aftermarket radio.
1 Align the holes on the factory backet
assembly with the holes on the after-
market Double DIN head unit and
mount with the screws supplied with
the unit. (Figure A)
2 Cut and remove the center rib (shad-
ed) from the Double DIN Trimplate.
(Figure B)
3 Snap the Double DIN Trimplate over
the head unit. (Figure C)
Continue to final assembly.
Assembled kit.
99-7860 KIT ASSEMBL Y
A
B
C