Advertisement
Quick Links
INSTALLATION INSTRUCTIONS FOR PART 99-7877S
Honda Fit 2009-10
99-7877S
KIT FEATURES
• DIN Radio Provision with Pocket
• ISO Mount Radio Provision with Pocket
• Double DIN Radio Provision
• Stacked ISO Mount Units Provision
• Painted To Match Factory Dash
"S"= SILVER
KIT COMPONENTS
• A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Double DIN Brackets
• E) Double DIN Trim Plate • F) Pocket
A
E
1-800-221-0932
© COPYRIGHT 2010 METRA ELECTRONICS CORPORATION
APPLICATIONS
B
F
TOOLS REQUIRED:
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver • Socket Set
C
WIRING AND ANTENNA CONNECTIONS
(Sold Separately)
• 70-1729 Honda Harness 2008-up
• 40-HD10 Honda Antenna Adapter 2005-up
www.metraonline.com
D
Advertisement
Related Manuals for Metra Electronics 99-7877S
Summary of Contents for Metra Electronics 99-7877S
- Page 1 INSTALLATION INSTRUCTIONS FOR PART 99-7877S Honda Fit 2009-10 99-7877S KIT FEATURES • DIN Radio Provision with Pocket • ISO Mount Radio Provision with Pocket • Double DIN Radio Provision • Stacked ISO Mount Units Provision • Painted To Match Factory Dash “S”= SILVER...
-
Page 2: Table Of Contents
- Double DIN Radio/ Stacked ISO Mount Units Provision ... . . 5 *Note: Refer also to the instructions included with the aftermarket radio. 99-7877S NOWLEDGE IS Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. -
Page 3: Honda Fit 2009-10
(Figure E) Remove (5) Phillips screws securing the a/c vents to the radio panel. Remove (7) retaining clips from radio housing to be used later in kit preparation. Continue to kit preparation. 99-7877S DASH DISASSEMBLY... -
Page 4: Kit Preparation
Secure the a/c vents to the radio housing using the factory hardware. (Figure B) Attach the (7) retaining clips to the radio housing panel in the same location as removed from the factory radio panel. Continue to kit assembly. 99-7877S KIT PREPARATION KIT PREPARATION... -
Page 5: Din Mount Radio Provision With Pocket
Housing and secure by bending the metal locking tabs down. (Figure A) Slide the aftermarket head unit into the cage and secure. (Figure B) Snap the pocket into the Radio Housing. (Figure C) Re-assemble dash in reverse order of disassembly. 99-7877S KIT ASSEMBLY... -
Page 6: Iso Mount Radio Provision With Pocket
Slide the head unit into the radio opening until the side clips engage. (Figure B) Snap the Trim plate into the Radio Housing. (Figure B) Snap the Pocket into the radio housing. (Figure C) Re-assemble dash in reverse order of disassembly. 99-7877S KIT ASSEMBLY... -
Page 7: Double Din Radio/ Stacked Iso Mount Units Provision
ISO head units to the assembly using the screws supplied with the radio. (Figure C) Snap the Double DIN trim plate onto the front of the radio/housing assembly. (Figure C) Re-assemble dash in reverse order of disassembly. 99-7877S KIT ASSEMBLY... - Page 8 99-7877S INSTRUCTIONS 1-800-221-0932 www.metraonline.com REV. 4/22/10 © COPYRIGHT 2010 METRA ELECTRONICS CORPORATION INST99-7877...