Double Din Head Unit Provision; Iso Stacked Head Unit Provision - Metra Electronics 95-7866B Installation Instructions Manual

DOUBLE DIN HEAD UNIT PROVISION/

ISO STACKED HEAD UNIT PROVISION

*
Note: Refer also to the instructions included with the aftermarket radio.
1 Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
2 Slide the Double DIN head unit or
stacked ISO head units into the
bracket/radio housing assembly and
secure the Double DIN head unit or
stacked ISO head units to the
assembly using the screws supplied
with the radio. (Figure A)
3 Reassemble dash in reverse order of
disassembly.
95-7866B KIT ASSEMBL Y
3
A