Honda pilot (with factory navigation) 2006-2008 (8 pages)
Summary of Contents for Metra Electronics 99-7864
Page 1
INSTALLATION INSTRUCTIONS FOR PART 99-7864 Honda Accord 2003-2007 (Equipped with Single Zone Climate Controls) 99-7864 KIT FEATURES • DIN Radio Provision • ISO Radio Provision KIT COMPONENTS A) Radio/Climate Control Housing B) ISO Brackets C) ISO Trim Plate D) PPH-1034 Screws Small Flat Blade Screwdriver/ •...
NOTE: To adapt dual zone climate controls to a single zone system to work with this kit you will need Metra harness #70-7864DZ (sold separately). 99-7864 NOWLEDGE IS Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.
Rubber cover may come out first but entire assembly must be removed to access screws below. (Figure B) Remove (2) Phillips screws from under coin tray/ashtray and remove entire assembly. (Figure C) Continue to kit assembly. 99-7864 DASH DISASSEMBL Y...
Page 4
Tip: You can use a hook tool to grasp the panel inside of the vent and pull toward the rear of the vehi- cle. Be careful not to scratch the panel. Unclip and remove radio/climate control assembly. Continue to kit assembly. 99-7864 DASH DISASSEMBL Y...
Slide the aftermarket radio into the cage and secure. (Figure B) Continue to final assembly. Programming: In order to adjust the 99-7864 to the different types of radios available in the Honda Accord, the 99-7864 has a program fea- ture.
5 in Dash Disassembly. Continue to final assembly. Programming: In order to adjust the 99-7864 to the different types of radios available in the Honda Accord, the 99-7864 has a program feature.
*NOTE: When a Black wire is not present, ground radio to vehicle chassis. All colors may not be present on all leads due to manufacturer’s specifications. 99-7864 FINAL ASSEMBL Y (A) Strip wire ends back 1/2" B) Twist ends together...