7.2
Intelligent Function Module Parameters
Set intelligent function module parameters.
Set the parameters in the "New Module" window.
Project window Right-click [Intelligent Function Module] [New Module]
Item
Module Type
Module
Selection
Module Name
Mounted Slot No.
Mount Position
Specify start XY address
Title setting
Title
After these settings are configured, a folder is created under the "Intelligent Function Module" folder in the Project
window.
X, Y, and W can be set as an auto refresh device.
64
Select a module type.
Select a model name.
Select the number of the slot where an intelligent function module
is mounted.
Click this button to check I/O assignment setting configured in the
button
PLC Parameter.
Enter the start I/O number.
Enter a title displayed in the Project window.
Description
Setting range
User's manual for the intelligent
function module used