Submixes - Akai MPC X User Manual

Submixes

You can load up to four insert effects to each submix. You can do this in the Channel Mixer only.
Important: Submixes are available only while using your MPC hardware in Controller Mode with the desktop version
of the MPC software.
To load a submix insert effect:
1. Use the Mixer field in the upper-left corner to select Submixes.
2. In the touchscreen, tap the pad that corresponds to the desired program. Alternatively, double-tap the Submix
field below the Mixer field and tap the desired program.
3. Tap the area under Inserts, and then use the screen that appears to load or edit effects. Alternatively, tap the Insert
tab at the bottom of the screen (tap it multiple times to select a different insert slot), and then double-tap the desired
pad on the screen. You could also use the data dial or –/+ buttons to select an effect immediately.
94