Akai MPC X User Manual page 61

Alternatively, assign samples in a drum program in Program Edit Mode in one of these two ways:
1. Press Menu, and then tap Program Edit to enter Program Edit Mode. Alternatively, press Prog Edit (MPC X).
2. Tap the Samples tab. This lets you view the samples assigned to all four layers of the current pad as well as
tuning and level parameters for each layer.
3. Tap a pad to select it (and play its assigned samples, if any). The pad will be lit green.
4. Tap one of the Layer fields under the sample waveform to select a layer. Tap the Sample field, and then use the
data dial or –/+ buttons to select a sample. Alternatively, double-tap the field for a layer, and then tap a sample
to select it.
1. Press Menu, and then tap Program Edit to enter Program Edit Mode. Alternatively, press Prog Edit (MPC X).
2. Tap the Pan Velocity tab. This lets you view the samples assigned to all four layers of the current pad as well as
panning and velocity ranges of each layer.
3. Tap a pad to select it (and play its assigned samples, if any). The pad will be lit green.
4. Tap one of the Layer fields to select a layer, and then use the data dial or –/+ buttons to select a sample.
Alternatively, double-tap the field for a layer, and then tap a sample to select it.
61