Masters
The Master Mixer shows levels, panning, mute states, and insert effects for all used stereo pairs of outputs (Out 1,2–
7,8 in Standalone Mode, Out 1,2–31,32 in Controller Mode; MPC Live does not use Out 7,8 in Standalone Mode but
displays them to maintain compatibility with MPC X, which does use them).
To view a specific setting on all outputs, tap Level, Pan, Mute, or Insert at the bottom of the screen. You can tap
Insert multiple times to cycle through the four available slots.
When viewing the master channel strip:
Note: This is the same as the master channel strip in Main Mode.
The first field shows the current master output (which you can change).
The Inserts field shows any enabled or disabled effects for that master output. Tap the area under Inserts to
open a window where you can load, change, and enable or disable the effects for all four insert slots.
Tap Mute to mute that master output.
Adjust the pan knob or level slider to change the panning or level of the master output.
262