Tremolos; Phasers - Akai MPC X User Manual

Tremolos

This effect uses an LFO to increase and decrease the volume of the signal. Depending on the LFO shape, this can
produce a smooth wave effect (sine wave) or a stuttering "on-off" effect (square wave).
Options: Tremolo, Tremolo Sync
Tremolo
Tremolo Sync

Phasers

The phaser is a classic effect, created by multiple ganged all-pass filters to create "notches," or sharp spikes, in the
frequency spectrum. The frequencies of these all-pass filters are usually modulated by an LFO to create a sweeping
sound.
Options: Phaser 1, Phaser
Phaser 1
Phaser 2
Phaser Sync
2, Phaser Sync
Parameter Value Range
Dry/Wet 0–100 (dry–wet)
Rate 0–100
Sine to Square 0–100 (sine–square) 0
Parameter Value Range
Dry/Wet 0–100 (dry–wet)
Rate 1 bar – 1/16 triplets
Sine to Square 0–100 (sine–square) 0
Parameter Value Range
Dry/Wet 0–100 (dry–wet)
Rate 0–100
Parameter Value Range
Dry/Wet 0–100 (dry–wet)
Rate 0–100
Parameter Value Range
Dry/Wet 0–100 (dry–wet)
Rate 1 bar – 1/16 triplets
Default Value
100
10
Default Value
100
1/4
Default Value
100
10
Default Value
100
10
Default Value
100
1/4
300