To open the Timing Correct window, press and hold Shift, and then tap TC at the bottom of the screen. See
Operation > General Features > Timing Correct (TC)
to learn about this.
To adjust the velocity of the selected notes, tap Velocity at the bottom of the screen, and then use the data
dial or –/+ buttons. The numeric value will appear on the screen.
To show or hide the velocity lane, tap the up arrow (∧) button in the lower-right corner of the screen to show
the velocity lane below the grid. Each note's velocity is represented by a vertical bar. The higher and more red
the bar is, the higher the velocity is.
Tap the up arrow (∧) button once more to show a taller version of the velocity lane after which it will turn into a
down arrow (∨) button, which you can then tap to hide the velocity lane.
32