To adjust the effect's parameters, tap the pencil icon. Use the sliders to set the value of each parameter. These
values affect only this instance of the effect; insert effects are not global.
Sends
The audio of the pad will be routed to send effects (if you have any loaded) at their designated send levels. The return
channels will then send the audio to an assigned master output at the designated return levels.
Use the Send knobs to set the volume level of the signal the pad will route to each send effect.
Important: To set the send level, use, you have to load an effect into the corresponding send effect slot in the
Channel Mixer > Returns
Channel Mixer. See
to learn more how to do this. To learn about send effects, please see
General Features > Effects > Send/Return
Effects.
200