Submixes; Masters - Akai MPCX User Manual

Submixes

The Submixer shows levels, panning, mute states, send and
insert effects, and routing for the eight available submixes.
Important: Submixes are available only while using MPC X
in Controller Mode with the desktop version of the MPC
software.
To view a specific setting on all submixes, tap Level,
Pan, Mute, Send, Insert, or Route at the bottom of the
touchscreen. You can tap Send or Insert multiple times to
cycle through the four available slots for each.
When a return is selected, you can view and adjust all of its
settings in the left side of the touchscreen rather than using
the tab buttons at the bottom.
When viewing the submixer channel strip:
The first field shows the current submix (which you can
change).
The second field shows where the submix is routed
(which you can change).
The Inserts field shows any enabled or disabled effects
for that submix. Tap the area under Inserts to open a
window where you can load, change, and enable or
disable the effects.
Tap Mute to mute the submix.
Adjust the pan knob or level slider to change the
panning or level of the submix.

Masters

The Master Mixer shows levels, panning, mute states, and
insert effects for all used stereo pairs of outputs (Out 1,2–
7,8 in Standalone Mode, Out 1,2–31,32 in Controller Mode).
To view a specific setting on all outputs, tap Level, Pan,
Mute, or Insert at the bottom of the touchscreen. You can
tap Insert multiple times to cycle through the four available
slots.
When viewing the master channel strip:
Note: This is the same as the master channel strip in Main
Mode.
The first field shows the current master output (which
you can change).
The Inserts field shows any enabled or disabled effects
for that master output. Tap the area under Inserts to
open a window where you can load, change, and enable
or disable the effects.
Tap Mute to mute that master output.
Adjust the pan knob or level slider to change the
panning or level of the master output.
181