Akai MPC X User Manual page 238

After you stop your recording, the Keep or Discard Sample window will appear.
Use the Edit Name field to name the new sample. Tap it and use the virtual keyboard that appears.
Use the Program field to assign the new sample to a program. Select <none> if you want to save it to the project
without assigning it to a program.
Use the Assign to Pad field to assign the sample to a pad in the program.
Use the Root Note field to set where the sample's original pitch will be on the keyboard.
If you recorded a sample while a sequence was playing, the Keep or Discard Sample window will show a few more
options after you select a pad.
Check the Add Event box to automatically add the sample to the currently playing sequence.
Use the @ field to select where you want the event to start:
• Start: The sample will be a note event at the start of the currently playing sequence.
•
Trigger: The sample will be a note event where you began recording it in the currently playing sequence.
Use the Track field to set which track will contain the new event.
To confirm your selections, tap Keep at the bottom of the screen.
To discard the recording and return to the Sampler, tap Discard at the bottom of the screen.
To play the recording, tap Play at the bottom of the screen.
Tip: We recommend editing your recorded sample in Sample Edit Mode (see Sample Edit Mode for more information).
238