Akai MPC X User Manual page 277

Use the Parameter field to select the parameter you want to control with the currently selected Q-Link knob.
When the MIDI Track tab is selected:
Mixer: Off, Volume, Pan, Mute, Solo
When the Audio Track tab is selected:
Mixer: Off, Volume, Pan, Mute, Solo, Send 1–4
Insert 1–4: Off, other available parameters depend on the effect
When the Program tab is selected and Type is set to Program:
Mixer: Off, Volume, Pan, Mute, Solo, Send 1–4
Program: Off, Master Semi Tune, Master Fine Tune
Insert 1–4: Off, other available parameters depend on the effect
When the Program tab is selected and Type is set to Pad:
Mixer: Off, Level, Pan, Pad Mute, Pad Solo, Send 1–4
Program:
Off
Tuning
Filter Cutoff
Filter Resonance
Filter Env Amount
Amp Env Attack
Amp Env Decay
Amp Env Release
Insert 1–4: Off, other available parameters depend on the effect
When the Return tab is selected:
Mixer: Off, Volume, Pan, Mute
Insert 1–4: Off, other available parameters depend on the effect
When the Submix tab is selected:
Mixer: Off, Volume, Pan, Mute, Send 1–4
Insert 1–4: Off, other available parameters depend on the effect
Important: Submixes are available only while using your MPC hardware in Controller Mode with the desktop
version of the MPC software.
When the Master tab is selected:
Mixer: Off, Volume, Pan, Mute
Insert 1–4: Off, other available parameters depend on the effect
Tap the Momentary checkbox to turn momentary behavior on or off.
When on, moving the Q-Link knob will adjust its parameter, but the parameter will immediately return to its
original position (when you turned Momentary on) when you release the Q-Link knob.
When off, moving the Q-Link knob will adjust its parameter, and the parameter will remain at its new setting
when you release the Q-Link knob.
Amp Env Hold Layer Sample Pan (1–4)
Amp Env Sustain Layer Semi Tune (1–4)
Filter Env Attack Layer Fine Tune (1–4)
Filter Env Hold Velocity to Start
Filter Env Decay Vel to Filter Attack
Filter Env Sustain Velocity to Env Amount
Filter Env Release Velocity to Filter
Layer Level (1–4) LFO to Pitch
LFO to Filter Velocity to Amp
LFO to Amp Velocity to Pan
LFO to Pan Layer Direction (1–4)
LFO Wave Layer Offset (1–4)
LFO Rate
LFO Sync
Velocity to Pitch
Vel to Volume Attack
277