Submixes - Akai MPC X User Manual

Submixes

You can set the send levels for submixes in the Channel Mixer only.
Important: Submixes are available only while using your MPC hardware in Controller Mode with the desktop version
of the MPC software.
To set the send levels for a submix:
1. In the Channel Mixer, use the Mixer field in the upper-left corner to select Submixes.
2. Tap the Send tab at the bottom of the screen (tap it multiple times to select a different send level).
3. In the touchscreen, tap the pad that corresponds to the desired submix. Alternatively, double-tap the Submix
field below the Mixer field.
4. To set the send level, use the data dial or –/+ buttons. To make finer adjustments, double-tap the pad on the
screen and adjust the larger version of the slider that appears.
100