Remove The Fresh Water Reservoir - Kärcher AP 100 M Service Manual

5.10.5Remove the fresh water reservoir.

1 Fastening screw
2 Operator console
Unscrew the suction hoses for the detergent from
the detergent containers.
Unscrew locking screws.
Remove the control panel.
Disconnect the connections.
Empty the dirt water reservoir.
1 Fastening screw
2 Drainage hose for fresh water
Remove the detergent reservoir.
Unscrew the rear fastening screws.
Pull fresh water drain hose off of the wastewater
reservoir.
42
English 5.906-508.0 Rev. 00 (11/10)
1 Fastening screw
Unscrew locking screws.
Remove wastewater reservoir toward the rear.
Lay the device on the side.
1 Water filter
2 Wheel support
3 Fastening screw
Unscrew the fastening screws of the wheel sup-
port.
Carefully remove the wheel support.
Loosen the hose clamps from the fresh water hose
and the detergent hose and pull the hoses off.
Pull the high pressure hose from the pump.