Table of Contents
Advertisement
5.5.4 Replacing the suction turbine
Preliminary tasks:
Remove suction turbine plate.
1 Fastening nut
2 Suction turbine
3 Suction turbine plate
Loosen the mounting nuts.
Disconnect all the connecting cables of the suction
turbine.
Remove the suction turbine.
Install the new suction turbine in reverse order.
Note
While installing the suction turbine please ensure that
the sealing ring sits stably on the suction turbine. If
the sealing ring is not installed correctly, the cleaning
results are unsatisfactory due to the weak suction
power.
After the assembly, check all hoses for leaks.
English 5.906-508.0 Rev. 00 (11/10)
31
Advertisement
Table of Contents
