Electrical System; Check The Population Of The Terminal Strip - Kärcher AP 100 M Service Manual

5.4 Electrical system

5.4.1 Check the population of the terminal strip

Note
The terminal strip is located on the suction turbine
plate next to the suction turbine.
Preliminary tasks:
Remove operating panel.
Remove the wastewater reservoir.
Remove suction turbine plate.
1 Connecting block
Check the cables by means of the following table.
Plug-in location Cable color
1 black
2 -
3 white
4 light brown/black
5 blue
6 -
7 black
8 black
9 orange
10 red
11 light brown
12 black
13 black
14 black
15 black
16 white
Installation in reverse order
Note
After the assembly, check all hoses for leaks.
26
English 5.906-508.0 Rev. 00 (11/10)
Connected component
EMC filter
empty
EMC filter
Appliance switch ON/OFF
Appliance switch ON/OFF
empty
Appliance switch ON/OFF
High pressure/low pressure solenoid valve
Pump switch
Fuse 5 A
Fuse 7 A
Suction turbine
High pressure/low pressure solenoid valve
Suction turbine
Pump motor
Pump motor