Kärcher K2.01 Operating Instructions Manual
Hide thumbs
Also See for K2.01:
- Operator's manual (30 pages) ,
- Manual (172 pages) ,
- Operating instructions manual (8 pages)
Related Manuals for Kärcher K2.01
Summary of Contents for Kärcher K2.01
-
Page 1: Operating Instructions
K 2.01 5.961-537 04/05/2009911 Operating Instructions PRESSURE WASHER PLEASE READ THIS LEAFLET CAREFULLY BEFORE OPERATING YOUR MACHINE... -
Page 2: Applications
This provides the cleaning power behind the Karcher Pressure Washer. A Karcher Pressure Washer can be used for an endless list of applications around the home and garden. It provides an efficient, economical and labour saving way of cleaning with excellent results. -
Page 3: Table Of Contents
INDEX APPLICATIONS SAFETY INSTRUCTIONS GETTING STARTED 3.1 Contents 3.2 Water Connection 3.3 Electrical Connection 3.4 Suction Mode 3.5 Detergent OPERATING YOUR PRESSURE WASHER 4.1 High Pressure Operation 4.2 Low Pressure Operation Without Brush 4.3 Low Pressure Operation With Brush 4.4 End Of Operation IMPORTANT –... - Page 4 • Garden tools and machinery, furniture and barbecues • Hygienic cleaning of animal pens and their surroundings With the addition of Karcher accessories, the list continues ..... • Clearing blocked drains and pipes • Removal of old paint and rust from garden furniture and gates •...
-
Page 5: Safety Instructions
2. SAFETY INSTRUCTIONS Electrical Connection Never use defect connection or extension lines! If the connection line is damaged, it must be replaced with a special connection line that is available from the manufacturer or his customer service. Please make sure that the connection or extension lines are not damaged by being ran over, pulled or dragged. - Page 6 Safety Instructions The operation of the device in hazardous locations is not admissible. Please comply with the corresponding safety instructions if you use the appliance in danger areas (e.g. filling stations). Do not turn on the appliance if the power supply line or important components of the appliance, such as safety components, high- pressure hoses, spray jet, are damaged.
- Page 7 Cleaning operations during which oil saturated waste water is generated, such as engine cleaning and underbody cleaning, may only be performed in cleaning locations that are equipped with an oil separator. If you clean varnished surfaces, please respect a minimum distance of 30 cm to avoid damages.
-
Page 8: Getting Started
3. GETTING STARTED 3.1 Contents Upon opening the carton, if you do not have all the items as detailed please contact the Customer Helpline. Assembly see Page 21... -
Page 9: Water Connection
Please follow these instructions carefully for troublefree cleaning Use the diagram on Page 8 for reference purposes 3.2 Water Connection • The minimum length of supply hosepipe advised for maximum user convenience is 7.5 metres with a diameter of 12.5 mm (1/2") to avoid backpressure and any associated potential damage to your machine. -
Page 10: Detergent
3.4 Detergent Only cleaning agents recommended by Karcher (UK) Ltd. should be used. Unsuitable detergents could damage your Pressure Washer and the object being cleaned. Recommended Detergents 1. The following cleaning agent may be used undiluted: (But further dilution is practical but trial before application) Universal Cleaner ...... -
Page 11: Operating Your Pressure Washer
OBJECT OR SURFACE TO BE CLEANED IS 30 CM. IT CAN BE CLOSER IF REQUIRED FOR PATIOS OR MASONERY It is your responsibility to check the suitability of the surface to be cleaned. Karcher (UK) Ltd. cannot be held responsible for any damaged caused. -
Page 12: High Pressure Operation
4.1 High Pressure • Ensure the Dirtblaster Lance (No.7) is attached securely to the Spray Gun (No.10). • Aim the lance towards the object to be cleaned making sure the recommended working distance is used for reference (See Page 11). Release the Safety Lock Device (No.9) and squeeze the lever. -
Page 13: Low Pressure Operation Without Brush
4.3 Low Pressure Operation with Brush (not included) When cleaning surfaces with a grease contamination - typically car paint- work that always has a greasy traffic film covering. Follow the procedure of: • Washing loose dirt away with the clean water high pressure spray. •... -
Page 14: End Of Operation
PRESSURE SETTING. In the event of a break of 5 minutes in the operation of your Karcher Pressure Washer, always switch off the pump to avoid damage due to overheating. • Switch off the pressure washer by the Power Switch (No.3) and unplug the Mains Electric Lead (No.11) from the socket . - Page 15 • After using chemicals, always run fresh water through your machine. • The high pressure hose of your Karcher Pressure Washer should not be mistreated. It is designed to withstand high pressure operation so vehicles should NOT run over it, nor should it be pulled across sharp or abrasive edges.
- Page 16 6. ACCESSORIES A wide range of popular accessories are available from your local store selling Karcher Pressure Washers. 4.763-228 Dirt Blaster/Rotary Jet A rapidly rotating pencil jet used to remove loose paint, stubborn algae and moss from hard surfaces. 4.760-269 Triple Nozzle Lance An integral fan jet, pencil jet and low pressure chemical jet in one unit allows optimal nozzle selection.
-
Page 17: Accessories / Spare Parts
– please refer to the diagram below AND identify the particular model of your machine by reference to the data plate on the underside. Please write, email or fax Karcher (see page 19) with any parts order you wish to place. A premium rate Help-line Number is available for... - Page 18 7. PROBLEM CHECKLIST The machine you have chosen is of the highest quality. Correctly stored away from frost it should operate without problems. If a problem does arise, please check the following chart as a solution may be at hand. PROBLEM POSSIBLE CAUSE CORRECTION...
-
Page 19: Help-Line
8. HELP - LINE Karcher (UK) Limited operate a help-line allowing customers to discuss any problems experienced with our products. The help-line operates during normal business hours, if you have diffi- culty getting through, please understand that there are peak periods during the day when our consultants are unable to take all calls coming in. -
Page 20: Technical Data
9. TECHNICAL DATA Power Connection Water Connection Performance Data Dimensions Circuit Diagram... -
Page 21: Assembly
10.ASSEMBLY High Pressure Hose (No.8) and Spray Gun (No.10) Assembly... -
Page 22: Eu Declaration Of Conformity
EU Declaration of Conformity We hereby declare that the equipment described below conforms to the relevant fundamental safety and health requirements of the appropriate EU Directives, both in its basic design and construction as well as in the version marketed by us. This declaration will cease to be valid if any modifications are made to the machine without our express approval. - Page 23 Notes...