Omron PRT1-COM Operation Manual page 93

Transistor Output Units
Connector Pin
Arrangement
Wiring
Dimensions
82
The following diagram shows the pin arrangement for the connector.
Attach MOLEX connectors to the Transistor Output Unit and connect them to
external devices.
Applicable Connectors
Manufac-
turer
MOLEX Pressure-
welded
Crimp p
Wiring Examples
Note V terminals and V connector pins, as well as G terminals and G connector pins,
are internally connected. When the I/O power is being supplied from a terminal
block, the power can be supplied to the output devices from the V and G
connectors. Current supplied in this way, however, must be less than 2 A.
Connector Model number
Housing 521-09-0390
Housing 50-57-9403
Reeled contacts
16-02-0069
16-02-0086
Loose contacts 16-02-0096
16-02-0102
Crimping tool p g 570-36-5000
11-01-0209
24 VDC
+ --
I/O power
supply
Approx. 70
Section
Remarks
For AWG#24
For AWG#24 to 30
For AWG#22 to 24
For AWG#24 to 30
For AWG#22 to 24
For AWG#22 to 26
For AWG#24 to 30
Solenoids,
valves, etc.
(Unit: mm)
6-3