Gt1-Od16Ml-1 Transistor Output Unit With Connector (Pnp) - Omron PRT1-COM Operation Manual

Transistor Output Units
Dimensions

6-3-6 GT1-OD16ML-1 Transistor Output Unit with Connector (PNP)

Output Specifications
Components
I/O Unit Interface
Communications Connector 1
(on the Communication Unit side)
Note The vertical center of the Unit is 4.9 mm lower than the center of the DIN track.
The Unit therefore extends downward 41.4 mm (including the mounting hook)
from the DIN track center.
Item
Number of outputs
Current per common
TS Indicator (Refer to page 162.)
Output Indicators
Display the status of the outputs.
Lit when an output is ON.
Terminal Block DIN Track Mounting Hook
Approx. 59
Specifications
16 points
With connectors: 2 A max.
With terminal block: 2.5 A max.
I/O Unit Interface
Communications Connector 2
(on the terminator side)
Digital Output Connector
(made by FUJITSU)
Connects to the output devices, such as
relays and solenoids, via an I/O Block or a
Connector--Terminal Block Conversion Unit.
Section 6-3
(Unit: mm)
85