Omron PRT1-COM Operation Manual page 70

Transistor Input Units
Wiring
Dimensions
Attach MOLEX connectors to the Transistor Input Unit and connect them to
external devices.
Applicable Connectors
Manufac-
turer
MOLEX Pressure-
welded
Crimp p
Wiring Example
I/O power
supply
Wire colors in parentheses are the previous JIS colors for
photoelectric and proximity sensors.
Note V terminals and V connector pins, as well as G terminals and G connector pins,
are internally connected. When the I/O power is being supplied from a terminal
block, the power can be supplied to the input devices from the V and G
connectors. Current supplied in this way, however, must be less than 1 A.
110
Note The vertical center of the Unit is 4.9 mm lower than the center of the DIN track.
The Unit therefore extends downward 41.4 mm (including the mounting hook)
from the DIN track center.
Connector Model number
Housing 521-09-0390
Housing 50-57-9403
Reeled contacts 16-02-0069
16-02-0086
Loose contacts
16-02-0096
16-02-0102
Crimping tool p g 570-36-5000
11-01-0209
NPN output
3-wire sensor
(photoelectric or
proximity sensor)
Approx. 70
(Unit: mm)
Section
Remarks
For AWG#24
For AWG#24 to 30
For AWG#22 to 24
For AWG#24 to 30
For AWG#22 to 24
For AWG#22 to 26
For AWG#24 to 30
2-wire sensor
(limit switch)
60
6-2
59