Omron PRT1-COM Operation Manual page 102

Transistor Output Units
Connector Pin Arrangement
Wiring Wiring
Dimensions
Pin number
Function
Pin number
Function
Attach a 25-pin D-sub connector to the Transistor Output Unit and connect it to
external devices.
Applicable Connectors
When creating your own cables, use one of the following connectors.
Manufacturer
OMRON
XW2S-2513
XW2A-2501
Note V terminals and G terminals are internally connected. When the I/O power is
being supplied, the power can be supplied to the output devices from the V and
G connectors. Current supplied in this way, however, must be less than 2.5 A.
Note The vertical center of the Unit is 4.9 mm lower than the center of the DIN track.
The Unit therefore extends downward 41.4 mm (including the mounting hook)
from the DIN track center.
13 12 11 10 9 8 7
G
NC NC NC V OUT OUT OUT OUT OUT
07 06 05
25 24 23 22 21 20 19
NC NC V G OUT OUT OUT OUT OUT
15 14 13
Model number
Approx. 59
Section
6 5 4 3 2 1
OUT OUT OUT
04 03 02 01 00
18 17 16 15 14
OUT OUT OUT
12 11 10 09 08
Remarks
Hood
Plug
(Unit: mm)
6-3
91