Outline Of Functions; Nt11S Screen - Omron NT11S Operation Manual

Outline of Functions

4-2

Outline of Functions

4-2-1

NT11S Screen

Composition of the Screen
Screen Management
Special Screen Number
For the connection procedure to the support tool, refer to Section 2-3 Connecting
to the Support Tool (page 25). For the transmission of the screen data, refer to
Section 3-6 Registering the Screen Data (page 54).
This section gives the outline of the screen which is the basis of all NT11S func-
tions.
For specific operation procedure using host link/NT link such as screen switching,
refer to Section 4-3 Screen Display" (page 80).
The NT11S screen is composed of horizontal 160 dots x vertical 64 dots. Each dot
is set by the combination of the X (horizontal) and Y (vertical) coordinates. The
origin of coordinates (0, 0) is set at the top left corner of the screen.
0
0
Y coordinate
(vertical)
63
The screens displayed on the NT11S are managed by the screen numbers.
Screen numbers are set when the screen data are created by using the support
tool. Up to 250 screens can be set by allocating arbitrarily selected numbers 1 to
250.
The display screens can be switched or the start-up screen can be set by designat-
ing the screen number from the PC.
Screen number "0" is reserved for the system as the no-display screen. Select this
to display nothing on the NT11S screen.
X coordinate (horizontal)
Coordinates
(x, y)
Section 4-2
159
159, 63
77