Omron NT11S Operation Manual page 80

Back light OFF
Reference
Correct Use
64
Backlight OFF
Auto-restart
S To quit after setting the selection made, press the "ENTER" key.
To quit without setting the selection made, press any two function keys simulta-
neously.
S If "None" is selected, the backlight OFF function does not operate. As long as no
operations are performed, the same screen will be displayed indefinitely.
S If "10m" is selected, the backlight will be switched OFF if no operations are per-
formed for ten minutes.
S If "1h" is selected, the backlight will be switched OFF if no operations are per-
formed for one hour.
In order to maximize the service life of the backlight, select "10m" or "1h" if pos-
sible.
After images may remain if the same pattern is displayed for a long period.
To prevent the formation of an afterimage, either use the screen saver function or
periodicaly switch screens.
Pressing the [+/--] key while
Page:
"Backlight OFF" is highlighted
10min
will cause the selection for this
item to change cyclically in the
Yes
sequence "10m" "1h" "None".
Section 3-9