Menu Screen Function - Omron NT11S Operation Manual

Menu Screen Function

4-7

Menu Screen Function

The NT11S has a function whereby screens can be switched even in the absence
of a screen switching instruction from the PC, by using numeric keys on the
screen. This function is called the menu screen function.
When screen data is created with the support tool, specify "menu screen" as the
screen attribute and assign switching destination screen numbers to numeric keys
1 through 4.
If one of these numeric keys is pressed during operation, the screen whose num-
ber was assigned to the key will be displayed. At the same time, the screen number
of the destination screen is notified to the PC.
MENU 1: Screen A
2: Screen B
3: Screen C
4: Screen D
S Up to four destination screens can be registered per screen using the menu
screen function. The screen numbers of the destination screens are assigned to
numeric keys [1] to [4].
S For details on menu screen setting, refer to the NT11S support tool operation
manual.
For the details of the menu screen setting, refer to the "NT-series NT11S Support
Tool Operntion Manual" (V030-E1-j).
key [1]
key [2]
key [3]
key [4]
Section 4-7
Screen A
Screen B
Screen C
Screen D
87