Starting The Operation - Omron NT11S Operation Manual

Programmable terminal
Hide thumbs Also See for NT11S:
Table of Contents

Advertisement

Starting the Operation

3-8

Starting the Operation

Switching to the RUN mode Press the Quit in the System Menu. The start-up screen in the RUN mode will be
Reference
Confirming the Communications between the NT11S and the PC
Reference
62
After completing the screen data transmission, connect the NT11S to the PC and
start the operation.
Caution
Carefully check the operation of all screen data and host programs before using
them. If incorrect, the system may operate unpredictably.
Otherwise the system may operate unpredictably.
displayed.
If the NT11S has failed to start correctly; e.g., the start-up screen is not displayed,
an error message is displayed, or the screen is not displayed at all, refer to Section
6-2 "Responding to Displayed Error Messages" (page 133) and take appropriate
action.
Execute the PC program and confirm that the following operations are normally
performed.
S Confirm that the NT11S screens switch according to the PC program execution.
If the screens do not switch correctly, check the connection between the NT11S
and the PC and also check the settings.
Refer to Section 2 Hardware Settings and Connections.
S Confirm that the information selected by the NT11S function keys has been set
in the PC by displaying the contents of the words and bits using a peripheral tool
(LSS etc.). If the information sent from the NT11S has not been correctly re-
ceived by the PC, check the screen data settings (specifically the switch set-
tings).
For the details of the screen data creation, refer to the NT-series NT11S Support
Tool Operation Manual (V030-E1-1).
The start-up screen must be designated when the screen data is created by using
the support tool. If the start-up screen has not been designated, the screen with
screen number 1 will be displayed. If no screen data has been registered at screen
number 1, the "Screen not registered." error message will be displayed. For the
screen number setting, refer to Section 4-3 Screen Display (page 80).
Section 3-8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents