TP-Link TL-WR902AC User Manual page 78

Chapter 4
3 ) PPPoEv6: By default, the router uses the IPv4 account to connect to the IPv6
server. Click
Note: If your ISP provides two separate accounts for the IPv4 and IPv6 connections, please untick the PPPoE
same session with IPv4 connection checkbox and manually enter the username and password for the IPv6
connection.
4 ) Tunnel 6to4: An IPv4 connection type is a prerequisite for this connection type.
5. Configure the LAN settings. Select an
IPv6 addresses to the computers in your LAN.
provided. If RADVD is selected, it doesn't need to be configured. If DHCPv6 Server is
selected, please fill in the following parameters.
Advance to input further information if your ISP requires.
Configure the Router in Wireless Router Mode
Address Auto-Configuration Type
RADVD and
to assign
DHCPv6 Server are
71